, , ,

Gi Luting Prem 10g ciment ionomer de sticla glassionomer Ammdent

SKU: 7715

120,00 lei

Gi Luting Prem 10g ciment ionomer de sticla glassionomer Ammdent

Descriere
Gi Lutting Prem e un ciment polialchinoat pe baza de ionomeri de sticla cu o solubilitate slaba in cavitatea bucala si mediul acid (asemanator cu Ketac)

Aplicare
Cimentari de coroane, punti, inlay, onlay, pini, pivoti si inele ortodontice pentru molari.

Aplicare
GI Luting (Glass Ionomer Luting Cement) are un timp de lucru de cca 3min si priza dupa 5-7min (3-5min in caitatea bucala). O data cu cresterea temperaturii, timpul de priza scade, si invers.

Consistenta buna se obtine atunci cand cementul poate fi aplicat cu o perie aspra. Este esential ca in timpul cimentarii sa se evite contactul cu apa si saliva.

Metoda de preparare e cea clasica:

raport mixare 1 lingurita de pulbere la o picatura de lichid

se imparte gramajoara de pulbere in 4 parti

se picura in mijloc sau lateral (in functie de preferinta)

se inglobeaza fiecare gramajoara de pulbere pe rand

se aplica doar pe suprafete/cavitati curate si complet uscate

Timp de mixare: 30 seconds | Timp de lucru: 3 minutes | Timp de priza: 5-7 minutes.

Mod de prezentare
10 g pulbere, 6g lichid.

Method Of Use
Clean enamel, dentine, and metal surfaces thoroughly and dry completely. Make sure not to leave any traces of other materials which could impair the properties of GI Luting (Glass IonomerLuting Cement). Temporary work should be attached with eugenol-free Cement. Before attachment clean, the core, rinse (e. g. with H2O2), and dry.

When using GI Luting (Glass IonomerLuting Cement) for the first time, remove the cap from the bottle and fit the pipette attachment supplied.

Shake the powder well before use.

The working temperature should be 15°C-23°C.

Use one drop of liquid for one level measuring scoop of powder (powder/liquid ratio=3.0:1 g/g).

Put powder and liquid on a suitable glass plate or a suitable mixing pad.

When dispensing the liquid, hold the dropper bottle vertically. It is recommended to divide the powder into 3 portions and to mix it portion by portion into the liquid, using a solid plastic spatula or another abrasion-resistant spatula.

Indications/Precautions
Excess material can be removed after 10-15 min, preferably with an explorer. Desensitize strongly ground and sensitive sores prior to a temporary attachment.

Remaining varnish and other substances (e.g. isolating agent) can affect the adhesion and should be removed completely before using GI Luting Do not apply the cement excessively and maintain sufficient dentine thickness to avoid pulp irritations. If necessary, pulp protection should be applied in the proximity of the pulp or a core build-up should be carried out, if indicated.

Rinse instruments with cold water immediately after use and before the setting of the cement residues. After the removal of orthodontic bands, cement residues can be removed gently and rapidly with an ultrasonic scholar.

GI Luting contains polyacrylic acid, fluoro-silicate, and parabens. Do not use GI Luting in cases of hypersensitivities against these ingredients.

Storage
Close powder container immediately after use, in order to avoid infiltration of humidity which may result in a loss of compressive strength.

Store at temperatures 4°C-23°C

 

Brand

Ammdent

Ammdent

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Gi Luting Prem 10g ciment ionomer de sticla glassionomer Ammdent”

There are no reviews yet.